How to Design your Alvin Freestand System
You can order your requirements online. Please follow the below steps.
If you require any assistance specifying your system please give us a call on
020 8254 2626 or Email Us your drawings, sketches or photos.
Measure and sketch out your roof.
Apply the following rules to your drawing:
Maximum distance of 2 meters between uprights.
Maximum distance between post and corner 500mm.
Either an End Weight Kit or Wall Termination Kit (if being fixed to a wall) Must be used at the start and end of each run.
When a Wall Termination or End Weight is used the next post Must have a long arm.
Long Arms and Short Arms must be alternated along the run. You must not use two short arms next to each other.
Select the correct corner kits
(corners must be within 500mm of a post)
Tubes can be joined using a Straight Joiner Kit.
You Must use only one joiner per bay.
If you need to leave an access gap an End Weight Kit must be used on the upright on both sides of the opening.
When a End Weight is used the next post Must have a long arm.
The rails can be extended 500mm from the post then a 'Corner Kit' can be used to make an end D shape. A second corner kit can be used to return the rail if required.
Self closing gates are available in Yellow and Galvanised finish.