Alvin Key Clamps & Tubes For Surf Rack
Our robust and easy to assemble key clamps and tube means you can make any bespoke structure you desire. Take Harry Singer for example who has constructed the most creative of designs in a surf rack. Here, we will show you how this has been made and if you fancy purchasing one yourself, you’ll be able to find the kits also on this page. (Pipe Insulation not sold here).
The dseign is in our Size 5 range (26.9mm outer diameter). Other sizes can be found on our website. Please note although our products are strong, sturdy materials, we cannot guarantee the strength or performance with bespoke items. If you have a similar design or want any advice/assistance of any kind, send your sketches/photos through to firstname.lastname@example.org or contact 020 8254 2626.
You can get very creative when it comes to designing any structure with our Key Clamps & Tubes, and you do not necessarily have to stick with Harry Singer's superb design. If you want to follow in his footsteps though, we provide quick and easy kits to ensure you match the surf rack Harry has created.
Depending on what you will be using the rack for, you may need a different angled clamp. Harry has opted for the C07-5 45 Degree Tee so the surfboards slide down onto the arms nicely. All the clamps can be tightened with an Allen Key.
To tidy everything up, use our A68 Plastic End Caps for the exposed tube at the ends of the arms.
Tubes can be cut to any size you wish with our free tube cutting service. If you are unsure which lengths to go for at the time of purchasing, you can cut the tubes down on site with a hacksaw. For Harry's rack, the uprights were cut to 2000mm. The arms were trimmed down to 500mm. The spacer tubes which would fit inside the A10 & A06 are 60mm in length.
The Kits for Harry Singer's beatifully designed Surf Rack are below. Simply add the items to your basket and use the code: SURF5 for a 5% discount.
If you wish to purchase our standard tube lengths and cut on site, or would like to use our Free Tube Cutting Service for different lengths, please visit our website.
Please note, cheaper delivery methods are available with tube lengths under 2.4m.
We welcome any sketches/annotated photos if you prefer for us to visually see how you would like your design, please send them to email@example.com
If you need more clarification on the above, or need some assistance, please do not hesitate to get in touch with us.
London: +44(0)20 8254 2626
Sheffield: +44(0)114 312 2250
WhatsApp Text/ Picture Message
Number: 020 8254 2626
PO Box 478, Sutton, SM1 9PG